Sample Okanagan solar panel projects from Roost Solar

all
Residential
Commercial
Agricultural
Storage

90 panel (28 kW) system in Vernon

This project was installed using S-5 PV Kits. The PV kits are rail-less and clamp the panels directly onto the standing seam metal roof, creating a super sleek design.

64 panel (24 kW) system in Coldstream

This ground mount has an adjustable racking system that can be tilted for optimal production each season. Coupled with bi-facial panels that can produce power from the back side too, this array has impressive power output. The EnergyHub inverter and backup battery ensure the homeowner will have a safe supply of power during grid outages.

20 panel (6kW) system in Kelowna

The panels in this array were attached to the curved metal roof using clamps that avoided all roof penetrations. Next time you are at the Kelowna Visitor Centre check it out!

438 (152 kW) system in Enderby

This solar array was installed on a dairy barn in late summer 2019. It is the largest solar PV system on a farm in BC!

24 panel (8 kW) system in Vernon

This system was designed to offset the high electricity needs of the long-term commercial tenants. Each 315W panel produces about 350 kWh of electricity per year.

64 panel (20 kW) system in Vernon

The panels in this array perfectly filled the south roof and made a beautiful addition to this newly constructed shop.

72 panel (23 kW) system in Coldstream

Sometimes when you want to eliminate that hydro bill you have to use a lot of your roof! This project covered seven different roof faces and will offset 100% of household electricity use.

45 panel (14 kW) system in Nakusp

This rammed earth and timberframe home has a standing seam metal roof. Solar was installed using clamps that avoided all roof penetrations.

44 panel (13 kW) system in Coldstream

South-facing slopes are a great place to install flush ground mount systems. This system was installed in 2017 and has produced over 35 Megawatt hours (MWh) of energy in that time.

94 panel (29 kW) system in Vernon

This not for profit was looking for a long term way to help control their monthly electricity costs and turned to solar! Their array includes both ballasted flat roof mounts and flush roof mounts.

46 panel (14 kW) system in Kelowna

This array covers the south-facing slope of the farm's workshop and offsets almost 50% of the farm's electricity use.

36 panel (11 kW) system in Vernon

A ballasted roof mount is a great addition to this new build. Ballasted roof mounts are used on houses with flat roofs and avoid all roof penetrations.

54 panel (16 kW) system in Enderby

This mid-size array was installed on a steeper barn metal roof. Metal roofs are great for solar PV systems because the longevity of the roof itself matches well with the 30+ year lifespan of the solar panels we install.

42 panel (14 kW) system in Vernon

Micro-inverters are a cost-effective way to maximize the electrical output of each panel on smaller systems. This project was installed in three phases and now offsets almost 50% of household electricity use.

39 panel (12 kW) system in Armstrong

This system was installed on a pole barn. The number of panels that can fit on a barn roof varies based on the size of the roof and the roofs maximum structural load capability.

44 panel (14 kW) system in Vernon

An east-west orientation was used for this ballasted roof mount. Ballasted roof mounts are used on houses with flat roofs and avoid all roof penetrations. This house also includes a Tesla Powerwall.

132 panel (42 kW) system in Lumby

This net zero home was oriented perfectly south at a steep angle. With a roof full of panels and two 13.5 kWh Tesla Powerwalls, this house had all the bells and whistles and was showcased in Canadian Contractor in Sept 2019.

22 panel (7 kW) system in Vernon

This smaller agricultural system was designed to offset electricity usage from the orchard’s cold storage building.

20 panel (6 kW) system in Armstrong

The owners of this farm wanted to reduce their dependence on hydro power and it’s associated costs.

104 panel (35 kW) system in Kelowna

This commercial system was installed across two different roofs and shows that solar can work even with lots of rooftop HVAC units in the way!

54 panel (17 kW) system in Vernon

This installation includes two backup batteries and an EnergyHub inverter, providing energy autonomy for the homeowner during grid outages.

42 panel (13 kW) system in Salmon Arm

The array on this hobby farm was installed across two different roof faces. The layout includes one row of panels in landscape orientation to maximize use of roof space.

100 panel (39 kW) system in Vernon

The owners of this business wanted solar to complement their leading practices in sustainable operations and manufacturing (including heat recapture from their lens manufacturing processes).

56 panel (21 kW) system in Lake Country

This project used larger 380 watt (144 split cell) panels which are about 78" long and 39" wide, and weigh about 45 pounds each. The panels cover two roof surfaces and offset 100% of the electricity usage at this orchard.

28 panel (10kW) system in Vernon

A beautiful and tranquil spot for this ground mount system. A fully outdoor-rated inverter allows all the equipment to be mounted outside, saving indoor space and allowing AC to be run back to the house.